Power Chair Covers

The Power Chair Covers are available in a Standard Fabric or Heavy Duty Fabric for protecting a power wheelchair. These specifically designed covers protect a power wheelchair from the weather when stored or during transportation. Both chair covers measure 38 inches high, 18 inches wide, 44 inches long. Each cover easily slips over a power chair and secures around the bottom of the power wheelchair.

The Standard Fabric Chair Cover is made of 400-denier nylon with a urethane backing. This cover is secured around the power wheelchair with four metal grommets around the bottom with a draw cord and cord lock to tighten. The Heavy Duty Power Chair Cover is made of 600 x 300 polyester with PVC backing, and has 1 inch webbing belt through belt loops to tighten around the bottom.

*Please note: Power Chair Covers are not intended for highway use without using a securing device such as rope or cords over the top and through the grommet holes or tie down loops. This will reduce the amount of excess room under the cover and prevent billowing at high speeds.

Power Chair Covers Specifications:

• Measures: 38 inches high, 18 inches wide, 44 inches long.
• Standard Fabric: 400-denier nylon with a urethane backing.
• Heavy Duty Fabric: 600 x 300 polyester with PVC backing.
• Made in: U.S.A.